CWDP-305 Exam Dumps – Our Features

For what purposes are VPNs typically used in modern WLANs?(Choose all that apply.) Response:

• Remote AP tunneling to a corporate WLAN controller or VPN concentrator
• Client device connectivity to corporate resources from unsecured public networks
• Initial 802.11 authentication with the AP and subsequent data encryption
• Tunneling APs and WLAN controllers to cloud-based management platforms
• Tunneling APs and WLAN controllers to RADIUS and token servers
• Bridging client connectivity in ad hoc networks

What is a valid 40 MHz channel configuration in the 2.4 GHz ISM band where channels 1-11 are permitted?

• 4 (primary), +1 (secondary)
• 2 (primary), -1 (secondary)
• 8 (primary), +1 (secondary)
• 1 (primary), 6 (secondary)

In your company’s WLAN, you expect to have a mixed client PHY environment and plan to use protection mechanisms. The protection mechanism used by your client devices is configurable. What is the best protection mechanism for backward compatibility of 802.11n devices with 802.11b devices?Response:

• WMM Protection
• SMPS
• CTS-to-Self
• Dual-CTS
• RTS/CTS

What metric implements the simplest algorithm and lowest accuracy in networks requiring locations?Response:

• Angle of Arrival (AoA)
• Time of Arrival (ToA)
• Time Difference of Arrival (TDoA)
• Received Signal Strength Indicator (RSSI)

In addition to a copy of your design, which tools should you provide to ensure the installation team correctly deploys access points (APs) in the specified locations within a multi-floor indoor design?

• GPS and a map
• RF spectrum analyzer and packet capturing software
• Ladder and a pen
• Camera and marking tools

In a convention center, you have received complaints about the WLAN infrastructure. At this moment, the are only two APs in one auditorium.After analyzing the situation, you determined that there are more client devices that the infrastructure was designed for. There are only two APs to support more than 300 devices using the Wi-Fi at the same time.What should you do to make the Wi-Fi work as expected? Response:

• Redesign the entire WLAN
• Upgrade the Ethernet connections to MultiGig
• Quickly add more APs
• Turn up the output power on the APs so that they can handle more clients

In a convention center auditorium, you've received complaints about the WLAN performance. Currently, only two APs are installed, but they are supporting over 300 client devices simultaneously, which exceeds the original design. What action should you take to ensure the Wi-Fi works as expected?

• Redesign the WLAN for the auditorium requirement area
• Quickly add more APs to the auditorium requirement area
• Upgrade the Ethernet connections to MultiGig
• Turn up the output power on the APs so that they can handle more clients

Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLANinfrastructure?

• SoW
• BoM
• Design report
• Project plan

SSID hiding is not generally recommended because some frames require inclusion of the SSID. In what frames is the SSID always included?Response:

• Beacon
• Association request
• Probe response
• Probe request
• Authentication response

When implementing multiple SSIDs to what is each SSID typically mapped in order to provide traffic management separately for each SSID?

• DSCP tags
• Access Category
• 802.1p markings
• VLAN