HPE6-A72 Exam Dumps – Our Features

What is true about VSX? (Choose two.)

• VSX is ideal for Campus access layer deployments where ease of deployment is needed.
  
• VSX allows upgrading members with near zero downtime or loss of packets.
  
• VSX is available on all Aruba OS-CX switches except the 6300F model.
  
• VSX is implemented on static port switches. VSX-plus needed to stack chassis together.
  
• VSX run separate control planes to reduce latency and improve performance.
  

You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?

• checkpoint rollback 10
  
• checkpoint auto 10
  
• checkpoint auto confirm 10
  
• boot system secondary 10
  

Core(config)# user admin passwordCore(config)# interface mgmtCore(config-if-mgmt)# ip static 10.254.16.89/22Core(config-if-mgmt)# default-gateway 10.254.19.129Core(config)# ssh server vrf mgmtCore(config)# https-server vrf mgmtYou are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.Which two steps are missing? (Choose two.)

• Core(config)# https-server rest access-mode read-write
  
• Core(config-if-mgmt)# no shutdown
  
• Core(config-if-mgmt)# no tftp-server
  
• Core(config-if-mgmt)# enable
  
• Core(config)# https-server rest access-mode read-only
  

Core# configure terminalCore(config)# vrf GreenCore(config-vrf)# exitCore(config)#Core(config)# interface vlan 50Core(config-if-vlan)# ?Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?

• Core(config-if-vlan)# vrf attach Green
  
• Core(config-if-vlan)# ip vpn-instance Green
  
• Core(config-if-vlan)# ip vrf forwarding Green
  
• Core(config-if-vlan)# routing-context Green vrf
  

What are the commands to disable SSH and HTTPS services from the default VRF?

• Core-1(config)# no ssh server Core-1(config)# no https-server
  
• Core-1# no ssh server vrf default Core-1# no https-server vrf default
  
• Core-1(config)# no ssh server enable Core-1(config)# no https-server enable
  
• Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default
  

Which two options are the Layer 3 Routing protocols? (Choose two.)

• BGP
  
• LLDP
  
• OSPF
  
• MPLS E. 802.3ad
  

What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?

• Better Core router performance by offloading processing
  
• Shifting endpoint access to the Aggregation layer from the Access layer
  
• Using access control lists (ACLs) at the Core to improve performance
  
• Connecting WAN/MPLS and Data center access to the Aggregation layer
  

What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)

• Router ID
  
• Priority
  
• Hello and Dead intervals
  
• Area ID
  
• Process ID
  

Aruba Access Points tunnel traffic in a campus to the Mobility Controller using which protocol?

• Control and Provisioning of Wireless Access Points (CAPWAP)
  
• Generic Routing Encapsulation (GRE)
  
• Lightweight Access Point Protocol (LWAPP)
  
• Process Application Programming Interface (PAPI)
  

What are two features of the three-tier designs? (Choose two.)

• removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
  
• adds a distribution layer to free up resources from the Core for improved performance and routing throughput
  
• a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
  
• uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
  
• is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided